Here is the step by step directions for winterizing your hose bib correctly, to ensure no breakage or bursting when spring rolls around.
Step One: Take Off The Hose
You can’t winterize the hose bib with the hose attached to it still. No brainer right? Detach the hose from the hose bib and drain it completely. Frozen water in hoses can cause holes and leaks too, so to keep your hose over winter it needs to be properly drained. You can lay the hose down and walk the length of it, picking up small sections and letting the water flow out. Imagine a tube of toothpaste, and try not to miss any spots. Once it’s empty, roll it up and store it for the winter months.
Step Two: Drain the Faucet
This step is quite like the steps you take to winterize faucets in your home. You’ll locate the shut off valve for the outside water line (if you have any trouble here contact a plumber to help you locate it) and shut the water off. Once the water is disconnected go back outside and turn the faucet all the way on. This will drain out any water currently sitting in the line.
Step Three: Drain the Valve
Go back inside to where the shut off was, and locate a small brass looking plug or cap. Unplug that cap, so that the valve itself will drain. Draining the water out, without emptying the valve, is useless. You must do both. Once that valve and all the water in the line have been drained, you can close the valve and shut the hose bib faucet off.
You’re Done!
It’s a simple 10 minute job, but it can save you hundreds in plumbing repairs when spring thaws the frozen winter water.